Running Configuration Mediant SW

IP NETWORK

configure network tls name tls-version unlimited ciphers-server “RC4:AES128” ciphers-client “DEFAULT” ocsp-server disable ocsp-port 2560 dh-key-size 1024 ocsp-default-response reject exit tls name tls-version tls-v1.2 ciphers-server “RC4:AES128” ciphers-client “DEFAULT” ocsp-server disable ocsp-port 2560 dh-key-size 2048 ocsp-server-primary 0.0.0.0 ocsp-server-secondary 0.0.0.0 ocsp-default-response reject exit interface network-if 0 name “” activate exit dns srv2ip 0 domain-name “directrouting.local” transport-type tls dns-name-1 “sip.pstnhub.microsoft.com” priority-1 1 weight-1 1 port-1 5061 dns-name-2 “sip2.pstnhub.microsoft.com” priority-2 2 weight-2 1 port-2 5061 dns-name-3 “sip3.pstnhub.microsoft.com” priority-3 3 weight-3 1 port-3 5061 activate exit dns settings dns-default-primary-server-ip dns-default-secondary-server-ip activate exit mtc settings sbc-cluster-mode disabled sbc-device-role sbc-or-signaling-component-(sc) activate exit nat-translation 0 src-interface-name “” target-ip-address “” src-start-port “1” src-end-port “65535” activate exit exit

SIGNALING & MEDIA

configure voip coders-and-profiles ip-profile profile-name coders-group “AudioCodersGroups_0” media-security-behaviour preferable sbc-media-security-behaviour rtp sbc-rmt-refer-behavior handle-locally sbc-rmt-replaces-behavior handle-locally activate exit coders-and-profiles ip-profile profile-name coders-group “AudioCodersGroups_0” media-security-behaviour preferable sbc-media-security-behaviour srtp sbc-rmt-update-supp not-supported sbc-rmt-re-invite-supp supported-only-with-sdp sbc-rmt-delayed-offer not-supported sbc-rmt-refer-behavior handle-locally remote-hold-Format inactive ice-mode lite activate exit coders-and-profiles audio-coders-groups 0 coders-group-name “AudioCodersGroups_0” activate audio-coders 0 name g711-alaw p-time 20 rate 64 activate exit exit coders-and-profiles audio-coders-groups 1 coders-group-name “AudioCodersGroups_1” activate audio-coders 0 name g711-alaw p-time 20 rate 64 activate exit audio-coders 1 name g711-ulaw p-time 20 rate 64 activate exit exit realm name ipv4if “” port-range-start session-leg is-default enable topology-location up activate exit realm name ipv4if “” port-range-start session-leg activate exit sbc routing sbc-routing-policy 0 name “Default_SBCRoutingPolicy” activate exit srd 0 name “DefaultSRD” activate exit sip-interface interface-name network-interface “” -port tcp-keepalive-enable enable media-realm-name topology-location up activate exit sip-interface interface-name network-interface “” -port tls-context-name tls-mutual-auth enable tcp-keepalive-enable enable classification_fail_response_type 0 media-realm-name activate exit proxy-set 0 proxy-name “ProxySet_0” sbcipv4-sip-int-name activate exit proxy-set proxy-name proxy-enable-keep-alive using-options sbcipv4-sip-int-name activate proxy-ip 0 proxy-address “:” transport-type activate exit exit proxy-set proxy-name proxy-enable-keep-alive using-options proxy-load-balancing-method random-weights is-proxy-hot-swap enable tls-context-name dns-resolve-method srv sbcipv4-sip-int-name activate proxy-ip 0 proxy-address “directrouting.local” transport-type tls activate exit exit ip-group 0 name “Default_IPG” proxy-set-name “ProxySet_0” classify-by-proxy-set disable topology-location up activate exit ip-group name proxy-set-name media-realm-name ip-profile-name sbc-operation-mode b2bua topology-location up activate exit ip-group name proxy-set-name media-realm-name classify-by-proxy-set disable ip-profile-name local-host-name “” always-use-source-addr enable dtls-context sbc-operation-mode b2bua activate exit gateway manipulation settings outbound-map-set 1 activate exit gateway digital settings answer-detector-cmd 12582952 energy-detector-cmd 104 activate exit media security media-security-enable on media-sec-bhvior preferable-single-media activate exit media rtp-rtcp udp-port-spacing 5 activate exit message message-manipulations 0 manipulation-name manipulation-set-id message-type “Options” condition “param.message.address.dst.sipinterface==’’” action-subject “header.contact.url.host” action-type modify action-value “’’” activate exit sbc routing condition-table 0 name “DirectRouting-Contact” condition “header.contact.url.host contains ‘pstnhub.microsoft.com’” activate exit sbc routing ip2ip-routing 0 route-name “OPTIONS Terminate” request-type options dst-type dst-address dst-address “Internal” activate exit sbc routing ip2ip-routing 1 route-name “REFER” re-route-ip-group-name trigger refer dst-type request-uri dst-ip-group-name activate exit sbc routing ip2ip-routing 2 route-name “ to “ src-ip-group-name dst-ip-group-name activate exit sbc routing ip2ip-routing 3 route-name “ to “ src-ip-group-name dst-ip-group-name activate exit sbc classification 0 classification-name message-condition-name “DirectRouting-Contact” src-sip-interface-name dst-host “” src-ip-group-name activate exit sip-definition settings ldap-primary-key “telephoneNumber” activate exit exit

ADMINISTRATION

configure system clock utc-offset activate exit ntp primary-server “” activate exit sbc-performance-settings sbc-performance-profile optimized-for-sip activate exit hostname “Mediant SW” configuration-version 0 exit

TROUBLESHOOT

configure troubleshoot activity-log config-changes on files-loading on device-reset on flash-burning on software-update on unauthorized-access on sensitive-config-changes on login-and-logout on cli-commands-log on action-execute on activate exit syslog syslog on debug-level detailed syslog-ip activate exit activate exit